Ereada Mats Compact Pro Controller - Compatible with Professional & Single Brown E-Reader Mats | Perfect for Home, Office & Gaming Setups

CONTROLLER for Brown Ereada Amethyst Mats Compact Pro, Professional, Single with N.P. function

All Controllers for Rich Brown Compact Pro, Professional, and Single Amethyst Mats have a temperature dial to choose one of seven temperature settings in the range between 86°F~158°F (30°C-70°C) displayed as levels 1-7 on the controller screen.

It activates and auto-shuts off the Negative Potential Electrostatic Field after 60 minutes.

These controllers have three time settings: 3, 6, or 9 hours. The Timer should be activated to start heating and all other functions. After the preset time expires, the controller auto-shuts off the mat.

Heat levels are displayed as Levels on the controller screen.

The controller has a built-in AUTO EMI (Electromagnetic wave interception) function that automatically detects and transfers absorbed EMF spikes into the wall socket's “ground pin” for Earthing.

COMPATIBILITY

THIS CONTROLLER FITS BROWN EREADA AMETHYST COMPACT PRO MATS 24"x59", PROFESSIONAL MATS 29"x73", AND SINGLE SIZE MATS 39"x75". It does not fit Purple Ereada Mats and Gemstone Ereada Mats.

Before 2015, these controllers were calibrated for 9 temperature levels in the same temperature range. We reduced the number of levels for better reliability, but all prior-to-2015 models of Brown Ereada Amethyst Mats are compatible with these new controllers, which have seven heat levels.

The Ereada ventilated controller is very durable, and if it was not damaged during shipping, it should work correctly for many years.

USEFUL TIPS

To extend life, please follow these rules:

• When the controller plug is disconnected from the mat terminal, it is important not to pull it by the wire, as this may damage the connectors or cause them to become loose. Instead, the controller cable connector plug should be pulled by one hand, the mat connection terminal socket held by the other hand, and slowly disconnected from each other.
• The plug with the connector from the controller to the mat terminal socket should be connected tightly. If not, errors may be shown. The easiest way to solve any problems is to reset the controller by disconnecting the controller's plug from the power socket first and then from the mat connection terminal. The first reconnect the mat tightly and then plug it into the electricity socket again. 
• Do not put the controller on the hot mat. Do not spill water on the controller. Never touch it with wet hands. Never wash it or clean it with chemicals.
• If your area experiences frequent electrical blackouts or power spikes, please connect the device to electricity through a surge protection, AVR, or UPS device similar to the one that protects computers or refrigerators. This device will protect the controller from faults caused by power surges.