Purple Ereada Mats Controller for Compact Pro, Pro & Single Models - Perfect for Yoga, Meditation & Home Fitness Workouts

CONTROLLER for Purple Ereada Amethyst Magnetic Mats Compact Pro, Professional, Single with Photon and Magnetism functions

All Controllers for Purple Ereada Amethyst Mats Compact Pro, Professional, and Single have a temperature dial to choose one of seven temperature settings in the range between 86°F~158°F (30°C-70°C) displayed as levels 1-7 on the controller screen.

The controller activates the magnetism function with 20 min cycles every 2 hours and auto-shuts off after four cycles.

The controller with the photon function activates red light LEDs with 1-hour cycles every 4 hours and auto-shuts off after two cycles.

These controllers have three time settings for 4, 8, or 12 hours of procedure length to choose. The Timer should be activated to start heating and all other functions. The controller auto-shuts off the mat after the preset time expires.

Controllers have built-in air ion function generating negative ions, which auto-shuts off after 1 hour of operation.

All functions can be manually activated or stopped by pressing the appropriate button.

Heat levels are displayed as Levels on the controller screen.

The controller has a built-in AUTO EMI (Electromagnetic wave interception) function that automatically detects and transfers absorbed EMF spikes into the wall socket's “ground pin” for Earthing.

COMPATIBILITY

THIS CONTROLLER FITS PURPLE EREADA AMETHYST COMPACT PRO MATS 24"x59", PROFESSIONAL MATS 29"x73" AND SINGLE SIZE MATS 39"x75".

This controller does not fit Gemstone Magnetic Ereada Mats and Brown Ereada Amethyst Mats. 

USEFUL TIPS

To extend life, please follow these rules:

• When the controller plug is disconnected from the mat terminal, it is important not to pull it by the wire, as this may damage the connectors or cause them to become loose. Instead, the controller cable connector plug should be pulled by one hand, the mat connection terminal socket held by the other hand, and slowly disconnected from each other.
• The plug with the connector from the controller to the mat terminal socket should be connected tightly. If not, errors may be shown. The easiest way to solve any problems is to reset the controller by disconnecting the controller's plug from the power socket first and then from the mat connection terminal. The first reconnect the mat tightly and then plug it into the electricity socket again. 
• Do not put the controller on the hot mat. Do not spill water on the controller. Never touch it with wet hands. Never wash it or clean it with chemicals.
• If your area experiences frequent electrical blackouts or power spikes, please connect the device to electricity through a surge protection, AVR, or UPS device similar to the one that protects computers or refrigerators. This device will protect the controller from faults caused by power surges.