CONTROLLER for Gray Ereada Mats Compact Pro, Professional, Single
These controllers have a temperature dial to choose one of seven temperature settings in the range between 86°F~158°F (30°C-70°C) displayed as levels 1-7 on the controller screen.
The controller activates magnetism with 20-minute cycles every 2 hours and auto-shuts off after four cycles.
These controllers have three time settings: 4, 8, or 12 hours. The Timer should be activated to start heating and all other functions. After the preset time expires, the controller automatically shuts off the mat.
Controllers have built-in air ion function generating negative ions, which auto-shuts off after 1 hour of operation.
All functions can be manually activated or stopped by pressing the appropriate button.
Heat levels are displayed as Levels on the controller screen.
| LEVEL 1 | 86°F or 30°C (Sleeping mode) |
| LEVEL 2 | 98°F or 36°C (Low mode) |
| LEVEL 3 | 110°F or 43°C (Low medium mode) |
| LEVEL 4 | 120F or 49C (Medium mode) |
| LEVEL 5 | 133°F or 56°C (Medium-High mode) |
| LEVEL 6 | 145°F or 63°C (High mode) |
| LEVEL 7 | 158°F or 70°C (Highest mode) |
The controller has a built-in AUTO EMI (Electromagnetic wave interception) function that automatically detects and transfers absorbed EMF spikes into the wall socket's “ground pin” for Earthing.
COMPATIBILITY
THIS CONTROLLER FITS GRAY EREADA BIO MAGNETIC COMPACT PRO MATS 24"x59", PROFESSIONAL MATS 29"x73" AND SINGLE SIZE MATS 39"x75".
This controller does not fit Purple Ereada Amethyst Mats or Brown Ereada Amethyst Mats with N.P. function.
The Ereada ventilated controller is very durable, and if it was not damaged during shipping, it should work correctly for many years.
USEFUL TIPS
To extend life, please follow these rules:
- When the controller plug is disconnected from the mat terminal, it is important not to pull it by the wire, as this may damage the connectors or cause them to become loose. Instead, the controller cable connector plug should be pulled by one hand, the mat connection terminal socket held by the other hand, and slowly disconnected from each other.
- The plug with the connector from the controller to the mat terminal socket should be connected tightly. If not, errors may be shown. The easiest way to solve any problems is to reset the controller by disconnecting the controller's plug from the power socket first and then from the mat connection terminal. The first reconnect the mat tightly and then plug it into the electricity socket again.
- Do not put the controller on the hot mat. Do not spill water on the controller. Never touch it with wet hands. Never wash it or clean it with chemicals.
- If your area experiences frequent electrical blackouts or power spikes, please connect the device to electricity through a surge protection, AVR, or UPS device similar to the one that protects computers or refrigerators. This device will protect the controller from faults caused by power surges.
